30Showroom
The label showroom
Two catalogues the construction pages do not carry: what the label has to survive, and what it can be made of. Every picture is work that left this factory.
Solutions
What the label has to survive
Buyers arrive with a problem, not with our vocabulary — a freezer, a solvent wipe, a curved battery can. Start here.
-
Cold-chain labels
Adhesive that grabs at −18 °C and keeps holding through frost, condensation and thaw. Specified for refrigerated, frozen, deep-frozen and liquid-nitrogen handling.
-
Premium wine and spirits
Selected specialty stocks, saturated and accurate colour, edges that stay down. Still crisp after a long shelf run or a spell in a cellar.
-
Household and personal care
Face stock matched to an eco-friendly adhesive: waterproof, rub-resistant, print still legible after a wet cabinet and repeated handling.
-
Both-sides printing
Front display plus a back that carries information, on one label. Crisp type on both faces — the panel a shopper never turns to is still being read through the bottle.
-
High-tack labels
Built for adhesion: stays put under everyday pulling and rubbing, bonds to a wide range of surfaces, holds a marking in place for years.
-
Clean-removal labels
Firm while it must be, then lifts in one piece. No lifted corners in service, no residue on the pack, and the surface is clean enough to re-label.
-
Durable identification
Resists ageing, abrasion and solvent, holds on through complex environments. The marking stays complete and readable for the life of the part.
-
Heat-dissipating labels
Conductive construction that pulls working temperature down, slows thermal ageing and stays bonded — identification and thermal management in one part.
-
Multi-layer labels
A laminated build that does not delaminate: the face shows the brand, the layers underneath carry the rest. One label doing several jobs.
-
Battery labels
Heat-resistant insulating stock with a high-tack adhesive. Abrasion- and scratch-proof, no lifting, print stays legible — for dry cells, packs and storage batteries.
Face stocks
Twenty materials we keep on the floor
The first question on almost every enquiry. Any of these can be combined with any construction and any finish.
-
Coated art paper
Glossy face, takes ink well, the economical default
Typical useFood, household goods, general retail
-
Synthetic paper
Waterproof, tear- and oil-resistant, strong all round
Typical usePremium packaging, logistics, food, household chemicals
-
Specialty papers
Textured stocks; different papers give different surfaces
Typical useGift packaging, premium wines and spirits, special-effect work
-
Direct thermal
Prints without a ribbon, clean image, low cost
Typical useShipping labels, scales, receipt printing
-
Clear BOPP
High clarity — the no-label look, the product shows through
Typical useCosmetics, beverages, stationery, anything in clear packaging
-
PVC
Soft, tough, waterproof and oil-resistant, colour stays bright
Typical useElectronics, cosmetics, household goods, chemical labels
-
PET
Heat-, tear- and chemical-resistant; holds its shape and size
Typical useElectronics, automotive parts, outdoor equipment
-
Gold and aluminium foil paper
Metallic ground with real lustre, embosses and foils well
Typical useSpirits, cosmetics, packaging seals, craft goods
-
Kraft paper
Uncoated natural fibre, matt, warm; takes a stamp or a pen
Typical useHandmade goods, organic food, gift and craft packaging
-
Degradable stock
Meets environmental and carbon-reduction requirements, breaks down without secondary pollution
Typical useFood and beverage, mother-and-baby, household care, logistics
-
Holographic and bright silver
Colour shifts with the viewing angle — decorative, and hard to copy
Typical usePremium packaging, seasonal promotions, limited editions
-
Glow-in-the-dark
Absorbs light and releases it in the dark — visible without power
Typical useSafety marking, evacuation routes, toys and novelty
-
Fluorescent
High-visibility colour that stays legible in poor light
Typical useWarnings, inspection marking, promotional flashes
-
Flexible magnet
Holds by magnetism, not adhesive — repositionable, leaves nothing behind
Typical useTool boards, shelf edges, vehicle signage, reusable marking
-
VOID tamper-evident
Lifting the label leaves a permanent VOID pattern behind — the evidence stays on the pack
Typical useWarranty seals, asset tags, electronics, high-value cartons
-
Outdoor UV-resistant
Built for sun, rain and temperature swing; colour holds, edges stay down
Typical useEquipment plates, outdoor signage, utility and site marking
-
Flame-retardant
Self-extinguishing face stock to recognised flammability ratings
Typical useHigh-risk industrial sites, construction and fire services, electronics
-
High-temperature
Survives high-temperature processing and storage without curling or losing print
Typical useElectronic components, chemicals, automotive parts, food processing
-
Battery shrink sleeve
Shrinks tight to a cylindrical cell, insulating and identifying in one wrap
Typical useCells, battery packs, power tools, energy storage
-
Reel-finished labels
Wound to your applicator's core, direction and count, with serials imaged inline
Typical useAutomatic labelling lines, batch packing, variable-data runs
Finishes
And the finishes that go on top
Surface treatments are documented in full on the technology page — they are not repeated here.
Get a quote
Send the artwork. We send back a dieline.
Tell us the panel count, the container it goes on, and the market. You get a construction drawing, a material recommendation and a price — usually within one working day.
- Email[email protected]
- Phone / WhatsApp+86 13602398701
- WhatsApp+86 13509817053
- Business hoursMon–Sat, 09:00–18:00 (GMT+8)
- Plant addressBuilding 3, Hengli Industrial Park, Dongguan, Guangdong 523460, China